On Numerical Simulations Of Flow And Heat
Transfer Of The Bend Part Of A U-duct
Author(s)
T. Salameh & B. Sundén
Abstract
Two dimensional numerical simulations of the flow and temperature fields inside
the bend (turn) part of a U duct have been performed. Both the standard and low
Reynolds number k- models were used to solve the smooth bend (turn) part and
ribbed bend (turn) part, respectively. For the standard k- model, the wall
function approach was used at the near wall region where the log-law was
assumed to be valid, whereas the modelling damping functions were used in the
low Reynolds number model. In the case of the ribbed bend (turn) part, two
approaches were used, the total approach and an approach based on periodic
flow condition. The details of the duct geometry were as follows: the cross
section area of the straight part is 5050 mm2, the inside length of the bend part
240 mm, the cross section area of the rib is 55 mm2 and the rib height-tohydraulic
diameter ratio, e/Dh, is 0.1. The results are compared with
experimental data obtained for the same conditions.
Keywords: smooth and ribbed bend part, standard k-ε, low Reynold number k-ε,
periodic flow condition.
1 Introduction
Roughness elements (ribs or turbulators) are used to enhance the heat transfer
level in the cooling passage where the cooling is required. The ribs enhance the
heat transfer process by restarting the boundary layer after flow reattachment
between ribs as shown in Fig. 1.
Keywords
smooth and ribbed bend part, standard k-ε, low Reynold number k-ε,
periodic flow condition
Related Book
Other papers in this volume
Warning (2)
: foreach() argument must be of type array|object, null given [in
/var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/templates/Papers/view.php, line
364]
Code
$counter = '0';
foreach ($paper['book']['Paper'] as $otherPaper) {
if ((!empty($otherPaper['name'])) && ($counter < '7') && ($otherPaper['available'] == 1)) {
Cake\Error\ErrorTrap->handleError() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/templates/Papers/view.php, line 364
/var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/View/View.php /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/View/View.php, line 1188
Cake\View\View->_evaluate() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/View/View.php, line 1145
Cake\View\View->_render() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/View/View.php, line 785
Cake\View\View->render() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Controller/Controller.php, line 712
Cake\Controller\Controller->render() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Controller/Controller.php, line 516
Cake\Controller\Controller->invokeAction() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Controller/ControllerFactory.php, line 166
Cake\Controller\ControllerFactory->handle() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Controller/ControllerFactory.php, line 141
Cake\Controller\ControllerFactory->invoke() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Http/BaseApplication.php, line 362
Cake\Http\BaseApplication->handle() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Http/Runner.php, line 86
Cake\Http\Runner->handle() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Http/Middleware/CsrfProtectionMiddleware.php, line 159
Cake\Http\Middleware\CsrfProtectionMiddleware->process() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Http/Runner.php, line 82
Cake\Http\Runner->handle() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Http/Middleware/BodyParserMiddleware.php, line 157
Cake\Http\Middleware\BodyParserMiddleware->process() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Http/Runner.php, line 82
Cake\Http\Runner->handle() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Routing/Middleware/RoutingMiddleware.php, line 118
Cake\Routing\Middleware\RoutingMiddleware->process() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Http/Runner.php, line 82
Cake\Http\Runner->handle() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Routing/Middleware/AssetMiddleware.php, line 69
Cake\Routing\Middleware\AssetMiddleware->process() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Http/Runner.php, line 82
Cake\Http\Runner->handle() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Error/Middleware/ErrorHandlerMiddleware.php, line 115
Cake\Error\Middleware\ErrorHandlerMiddleware->process() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Http/Runner.php, line 82
Cake\Http\Runner->handle() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/debug_kit/src/Middleware/DebugKitMiddleware.php, line 60
DebugKit\Middleware\DebugKitMiddleware->process() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Http/Runner.php, line 82
Cake\Http\Runner->handle() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Http/Runner.php, line 60
Cake\Http\Runner->run() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/vendor/cakephp/cakephp/src/Http/Server.php, line 104
Cake\Http\Server->run() /var/www/dce7ae55-385b-4ffa-8595-3ec5e61ff110/public_html/app/webroot/index.php, line 37
[main]
